Archive: 2012/8


Install Windows 8 from rusty 256 MB USB stick

This is the fourth time I installed Windows 8. This time I installed it on my personal notebook instead of a VHD, because Windows 8 is finally ready to market. So I started with downloading the enterprise edition from my MSDN subscription. Unfortunately my USB drive died so I had no storage large enough to put the image on and boot from. So I started thinking to install it over the network. Luckily me I still had my rusty 10 year old 256MB USB drive which perfectly fits a Windows PE image. So I also downloaded the Windows 8 ADK to make a Windows PE boot image. First install the Windows 8 ADK. Then open a command prompt and, key in the following commands to create a image. 123mkdir c:\winpe_amd64call copype.cmd amd64 c:\winpe_amd64Makewinpemedia /ufd c:\winpe_amd64 F: The first command makes a directory on your c: drive and can be removed afterwards. The second command creates all the necessary files for a 64 installation. The third command copies the files to your usb drive (in my case F:) and makes it bootable. If you need a 32 bit installation replace amd64 with x86. Then create a share on a pc in your network and extract the contents of the Windows 8 iso to the network share. Make sure you configure the security to allow everyone to access it. Also make sure your firewall responds to ping commands, this comes in handy when trying to connect to the share. I created a share called Win8.